Processing Capabilities

FULL IN-HOUSE CAPABILITIES

With full in-house capabilities, including design, engineering and fabrication, we meet the most demanding challenges while maintaining a "small shop" working environment.

With our complete line of equipment, IAF can perform all required processing from cutting, rolling, bending and machining.

Welding Capabilities
Complete Welding Procedures & QualificationsFrom 24ga up to 3" thickness
General Capabilities & Tolerances 
0 - 60"+/- 1/8"As required to +/- 0.20"
60" - 120"+/- 1/4"As required to +/- 3/32"
120" and over+/- 1/2"As required to +/- 3/16"
Angles+/- 1°
Cutting Capabilities & Tolerances 
Tube LaserAny length up to 3-1/2" diameter
Sheet Laser0" to 1-1/4" thickness with a 5'x10' cutting size - fully robotic loads and unloads
0 - 1/2" thick +/- 0.004"
1/2" - 1" thick +/- 0.010"
Water Jet0" - 1-1/2" thickness with a 6'x12' cutting size
Up to 1-1/2" thick As required to +/- 0.010"
1-1/2" to 6" thick As required to +/- 0.030"
CNC Pipe Plasma5-axis high definition plasmaUp to 2' diameter and 60' length
CNC Plate Plasma5-axis high definition plasma1/4" to 6" thick with 10'x30' cutting size
Shear22 gage to 1/2" thick by 12'
CNC Saws18" wide x 20" tall - any length
Machining Capabilities & Tolerances 
Drilling, Milling and Turning
10' x 30' x 3' tallUp to 10" thick 0.XX +/- 0.010"
0.XXX +/- 0.005"
Pipe 2' diameter and 60' length0.XX +/- 0.010"
0.XXX +/- 0.005"
Press Brake365 tons x 14' long
RollingUp to 1/2" thick x 10' long